Two real-world examples show how autonomous tire inspections helped mining operations identify tire issues earlier, respond before they escalated and reduce the potential downtime and production losses associated with tire failures.
From detection to action: how quickly are flagged tires removed?
Detecting a potential tire issue is only the first step. The operational value comes from acting on that information before the condition becomes more severe.
TireSight detections are supported by Kal Tire’s condition monitoring analyst team, who review detections and help sites determine the appropriate follow-up action. The data shows that tires with critical detections were typically removed quickly, with these detections primarily associated with hot conditions and separation risk.
Importantly, every TireSight detection included in the study was associated with a tire that was subsequently removed from service.
73% removed within two days
73% of tires with detected issues were removed within two days, with more than 80% removed within the first week.
Earlier intervention reduces the time a truck continues operating with a known tire issue, helping sites manage tire-related risk while supporting more informed maintenance decisions.
Key Outcomes
The measured time between TireSight detection and tire removal defines how long a tire observed by TireSight as damaged tire remains in operation.
-
73% of detected tires removed within 2 days
-
Over 80% removed within the first week
-
All tires with detected issues were ultimately removed, showing the effectiveness of TireSight’s detection capabilities
Shorter removal times provide clear operational advantages by reducing the duration of exposure to known tire-related risk scenarios. The outcomes below summarize the overall advantages associated with early tire removal after TireSight has flagged an issue.
Case Study Two - Avoiding worst-case downtime scenarios through early front tire intervention
Front tire failures in the pit result in significant equipment downtime and production loss.
When a front-position tire fails during operation, recovery and repair can take many hours, directly impacting equipment availability and productivity.
A tire running flat on a haul truck in operation creates extended downtime and productivity loss.
A front-position tire failure on a large haul truck (T-118) resulted in 12 hours of downtime. This event is used as a benchmark to represent a worst-case front tire failure scenario.
The Solution
KalPRO TireSight was implemented on the site to detect front-position tire risks early while trucks were still in production, enabling quick tire changes to reduce damage where required. This approach replaces the risk of an unplanned failure with a planned tire change following an alert.
To establish a fair comparison, only front-position tire events flagged by TireSight were evaluated, and each event was compared against this same worst-case benchmark.
The Results
Early intervention of detected issues using TireSight enabled trucks to be recalled for immediate tire changes across the 17 detections.
If TireSight had not been installed and trucks experienced the same failure while working in the pit, the total downtime loss would have equalled $244,800 and production loss $3,060,000.
TireSight minimized these potential losses by 72%
, ensuring productivity and truck uptime were maintained.